PRODUCT QUALITY AND SAFETY
KumKang Ceramic Phil. Co., Inc is committed in maintaining high quality products and business integrity.
In all business transactions, we endeavor to improve the products we provide, make accountable decisions in how we run our business, and make a positive impact for our customers, our suppliers, our workers and the environment.
We regularly perform Internal product testing and inspection requirements to validate the quality and compliance of our Products.
Products and materials must be tested at least annually by a competent third party testing laboratory.
TILT RESISTANCE
shall not tip over at 8 degree incline plane in the direction of least stability. (CPSD-HL-01011-MTHD)
PLASTIC PARTS
Phthalates content (CPSC-CH-C1001-09.4 Mod) – certain accessible plastic materials must have less than 1000 mg/kg of BBP, DBP, DEHP, DONP, DINP, DIDP, DIBP, DnPP, DnHP and DCHP.
testing for heavy metals content
Total heavy metal in surface coating ( ASTM F963-17 Sec.8.3.1 (Mod) / CPSC-CH-E1003- 09.1 / CPSD-AN00564-MTHD) All accessible surface coating in as receive state shall not contain compounds of which the metal content of the total
content exceeds the levels by weight (mg/kg) of the contained solid including pigments, film solids and driers [Antimony (Sb) 60, Arsenic (As) 25, Barium (Ba) 1000, Chromium (Cr) 60, Mercury (Hg) 60, Selenium (Se) 500]
FUNCTIONALITY AND SOAK TEST
Aquarium Soak Test – A minimum of 10 gallons of tap water shall be maintained at 25 +/-1°C. Install and run submersible water pump and ensure that the water flow rate reflects normal use conditions.
Each ornament is submerged in the tank for 14 days. At the end of the period, the ornament is rinsed with running water & evaluate the colorfastness and any damage/physical change. Shall be minimum 3.5 rating.
Shall have no functionality failure, structural failure and /or permanent deformation.
PACKAGING
Heavy Metals in Packaging – Model Toxic Legislation of the Toxics in Packaging Clearinghouse ( TCPH) – Packaging materials total content of Lead, Cadmium, Mercury and Hexavalent Chromium should not exceed 100mg/kg